University of Warith Al-Anbiyaa, Iraq

Full-time · Feb 2024 - Present

Assistant Professor, College of Advanced Technologies

Managing Editor Warith Scientific Journal of Engineering and Technology

Director, Scientific Affairs Department

Main responsibilities:  Formulating policies and procedures related to research, academic development, and scientific activities.  Collaborating with academic departments to align research initiatives with academic programs.  Monitoring the quality of research outputs and academic programs to meet national benchmarks.  Leading the planning and execution of scientific events, including conferences, seminars, and training sessions.  Providing resources, guidance, and training to support faculty and student research.  Organizing workshops on research methodologies and academic publishing.

------------------------------------------------------------------------

 Taylor’s University, Malaysia

Full-time · 1 yr 2 mos

Senior Lecturer, School of Engineering

Dec 2022 - Jan 2024 ·

Main responsibilities:  Deliver high-quality teaching, including lectures, tutorials, assessments, and student consultations.  Contribute to curriculum development, improving modules and academic programs.  Conduct academic research and publish in reputable journals.  Supervise and mentor students, especially final-year research projects.  Perform academic service and administration.

Additional Responsibilities:  Member of the Organizing Committee, Finance Team Head, EURECA 19 Conference, School of Engineering, Taylor's University., 01/06/2023 to 03/07/2023.  Member of the Organizing Committee, PERMINDA 2023, a landmark symposium on waste management and sustainable development, 20th and 21st of November 2023.  Internal Examiner, Doctoral Thesis Proposal Defense, May 2023.  Judge, 19th and 20th EURECA International Engineering and Computing Research Conference, 2023.  Judge, Project Design Competition during the Taylor's Engineering Fair 2023, July 2023.

-----------------------------------------------------------------------

University of Warith Al-Anbiyaa, Iraq

Full-time · 3 yrs 2 mos

Senior Lecturer, College of Engineering

Oct 2019 - Nov 2022 · 3 yr 2 mos

Responsibilities:  Delivering high-quality teaching, including lectures, tutorials, assessments, and student consultations.  Contributing to curriculum development, improving modules and academic programs.  Conducting academic research and publishing in reputable journals.  Supervising and mentoring students, especially final-year research projects.  Performing academic service and administration.

Head of Department, the Air Conditioning and Refrigeration Engineering

Oct 2021 - Nov 2022 · 1 yr 2 mos

Responsibilities:  Directed departmental strategy, operations, and academic quality.  Led curriculum enhancement efforts and oversaw the professional development, performance, and mentoring of academic staff.  Implemented initiatives to boost student enrollment and retention, while directly managing academic disciplinary matters.

Program Coordinator, the Air Conditioning and Refrigeration Engineering

Jan 2021 - Sep 2021 · 9 mos

Responsibilities:  Acted as the Deputy Head of Department, managing administrative tasks and ensuring the smooth implementation of HOD directives and departmental policies.  Prepared comprehensive academic reports for the HOD and ensured the program maintained full compliance with university regulations and educational policies.  Served as a member of the Examination Committee and the Scientific Committee.  Served as a member of the Strategic plan preparation committee  Served as a member of College of Engineering Self-Assessment Report preparation committee

------------------------------------------------

 Al-Mustaqbal University, Iraq

Full-time · 2 yr

Lecturer, College of Engineering

Oct 2017 - Sep 2019 · 2 yrs

Responsibilities:  Delivering high-quality teaching, including lectures, tutorials, assessments, and student consultations.  Contributing to curriculum development, improving modules and academic programs.  Conducting academic research and publishing in reputable journals.  Supervising and mentoring students.

----------------------------------------------------------

 Universiti Tenaga Nasional, Malaysia

4 yrs 1 mo

Academic Tutor (Part-time)

May 2013 - Jan 2016 · 2 yrs 9 mos

Tutoring: Mechanics of Fluids I, and Engineering Graphics and CAE (PTC Creo + AutoCAD)

Graduate Research Assistant (Full-time)

Dec 2012 - Jun 2014 · 1 yr 7 mos

Projects completed:

1-          Project code: 20130107FRGS Project title: “The Effect of Gas Combination on The Performance of Shock Tunnel and Gun Tunnel”. (Jul 2013 – Jun 2014).

2-          Project code: 01012011ERGS Project title: “A Parallel High Resolution Finite Volume Scheme for Transient High Speed Compressible Fluid Dynamics Employing Domain Decomposition on Distributed Memory Architecture”. (Dec 2012 – Jun 2013).

Academic Tutor (Part-time)

Nov 2010 - Feb 2011 · 4 mos

Tutoring: Heat Transfer.

--------------------------------------------

Industrial Experience: -

 Ministry of Industry & Mineral State Industrial Design and Consultation Company SIDCCO, Iraq

Full-time · 1 yr 2 mos

Site Engineer

Jun 2008 - Jul 2009 ·

Responsibilities: Supervising the construction and testing process of crude oil tanks and piping network of a crude oil refining plant in Al-Diwaniya Province, Iraq.

Al-Tathamen Al-Iraqi company, Iraq

Full-time · 10 mos

Site Engineer

Aug 2007 - May 2008 ·

Responsibilities: Dealing with the mechanical installation process of SIEMENS 8BT2 Air-Insulated Medium Voltage Switchgears (33 KV) in Old Al-Kut substation, Wasit, Iraq.

Year 2025 (9 published)

• Ayadi, H. Khalil, Ali M. Mohsen, ..et al., “Enhancing solar air heater performance using corrugated plates and perforated baffles”, Scientific Reports (Nature). (Scopus Q1 and Clarivate SCIE Q1).
• Ayadi, N. H. Alrasheedi, Ali M. Mohsen, ..et al., “Performance augmentation of a double-coil heat exchanger: analyzing the impact of radial fin count and diameter ratio”, Scientific Reports (Nature). (Scopus Q1 and Clarivate SCIE Q1).
• Ayadi, Z. Ahmed, Ali M. Mohsen, A. Alizadeh, ..et al., “Comparative analysis of ramp-based diamond fuel injectors for enhanced mixing in supersonic combustion chambers”, International Journal of Hydrogen Energy (Elsevier). (Scopus Q1 and Clarivate SCIE Q1).
• Ayadi, K. Rashid, Ali M. Mohsen, ..et al., “Artificial intelligence-driven modeling and metaheuristic optimization for enhanced PEMFC performance”, International Communications in Heat and Mass Transfer. (Scopus Q1 and Clarivate SCIE Q1).
• Ayadi, H. Khalil, Ali M. Mohsen, ..et al., "Numerical investigation of compartment diameter and spacing on the thermal performance of a single-slope solar desalination unit using graphene-enhanced phase change material”, European Physical Journal Plus (Springer Nature). (Scopus Q1 and Clarivate SCIE Q2).
• Alabbasi, A. Kareem, Ali M. Mohsen, “Heat transfer in a 3D cubic shell heat exchanger with rotating tubes and turbulent flow”, Case Studies in Thermal Engineering. (Scopus Q1 and Clarivate SCIE Q1).
• B.Hamida, Ali M. Mohsen, Muntadher Abed Hussein, Husam Rajab, Ali Chamkha, “A CFD based optimization procedure of operating parameters for an impinging jet on moving fabric subject to thermal dipping process”, International Communications in Heat and Mass Transfer Engineering. (Scopus Q1 and Clarivate SCIE Q1).
• B.Hamida, Ali M. Mohsen, A. Alizadeh, “Pareto optimal design of photovoltaic thermal systems with grooved helical channels using GMDH-type neural networks and multi-objective grey wolf optimizer”, Case Studies in Thermal Engineering. (Scopus Q1 and Clarivate SCIE Q1).
• Khan, Ali M. Mohsen, A. Alizadeh ..et al., “AI-integrated design of nanofluid-based PVT systems containing nano-enhanced PCM: Combining optimized GPR models with grasshopper optimization and the CoCoSo algorithm”, Case Studies in Thermal Engineering (Elsevier). (Scopus Q1 and Clarivate SCIE Q1).

Year 2024 (8 publications)

• Ali M Mohsen, Ali Basem, “Enhancing Heat Removal and H2O Retention in Passive Air-Cooled Polymer Electrolyte Membrane Fuel Cells by Altering Flow Field Geometry”. Sustainability (Switzerland). (Scopus, Q1 and Clarivate SCIE Q2).
• Ali Khaleel Kareem, Athraa Hameed Alabbasi, Ali M. Mohsen, “Simulation study of heat transfer behaviour of turbulent two-phase flow in a 3D cubic shell and tube heat exchanger using water and different nanofluids”, Results in Engineering (Elsevier). (Scopus Q1).
• Naseer H. Hamza, Ammar Abdulkadhim, Ali M. Mohsen, Azher M. Abed. 2023, “Analysis of double-diffusive hydrothermal flow in a domestic stack: The effect of side walls patterns”, Heat Transfer (Wiley). (Scopus Q1).
• Saja M. Alardhi, Ali M. Mohsen, Sura J. Mohammed Breig, “Response surface methodology for optimizing crude oil desalting unit performance in Iraq”, Chemical Papers (Springer Nature) (Scopus Q2, Clarivate SCIE Q3).
• Samer A. Kokz, Ali M. Mohsen, Khaldoon Khalil Nile, Zainab B. Khaleel, “Inductive 3D numerical modelling of the tibia bone using MRI to examine von Mises stress and overall deformation” Open Engineering. (Scopus, Q2).
• Ali M. Mohsen, Ali M. Tukkee, Teh Aun Yao, “A Numerical Analysis of Cylindrical and Conical Pin Fins Configurations for Enhancing Heat Exchanger Performance”, International Journal of Heat and Technology. (Scopus, Q3).
• Ali Khaleel Kareem, Athraa Hameed Turki, Ali M. Mohsen, “Optimization of turbulent flow heat transfer in a 3D cubic shell heat exchanger using non-mixture multiphase nanofluids”, Journal of Engineering Research (Elsevier). (Scopus Q2 and Clarivate SCIE Q2).
• Ali M Mohsen, Ali Basem, Ali M Tukkee, “Physical mechanism for prolonged test duration in shock tubes” Journal of Engineering Research (Elsevier). (Scopus Q2 and Clarivate SCIE Q2).

Year 2023 (4 publications)

• Oleiwi, Ali M Mohsen, A. Abdulkadhim, A.M. Abed, H. Laidoudi, A. Abderrahmane, "Experimental and numerical study on the heat transfer enhancement over scalene and curved-side triangular ribs", Heat Transfer (Wiley) (Scopus Q1).
• Ali M Mohsen, A. Oleiwi, A M Tukkee, H H Al-Kayiem, “Experimental Investigation of Heat Transfer Enhancement in Shell and Tube Heat Exchanger Using Discontinuous Curved and Longitudinal Straight Fins”, Journal of Engineering Science and Technology (Scopus Q3, Clarivate ESCI).
• Ali M. Tukkee, Ali M. Mohsen, Ali Abdul Wahab, Hussain H. Alkayiem, “An Assessment of the Effects of the Top Cover Plate Material on the Performance of the Solar Vortex Engine”, Journal of Engineering Science and Technology (Scopus Q3, Clarivate ESCI).
• Adil Akram Mahmood, Samer A Kokz, Ali M. Mohsen, “The Influence of Ultrasonic Impact Peening (UIP) on the Mechanical Properties and Fatigue Life of the AA1100 Alloy”, Journal of Applied Engineering Science (Scopus Q2).

Year 2022 (2 publications)

• Ali Basem, K.A. Hammoodi, A. Al-Tajer, Ali M Mohsen, I Omar, "A numerical investigation of the increase in heat transfer in a half-cylindrical container filled with phase change copper rods", Case Studies in Thermal Engineering (Elsevier). (Scopus Q1 and Clarivate Q1).
• Ammar Al-Tajer, Abdulhassan A. Kramallah, Ali M. Mohsen, Nabeel Sameer Mahmoud, “Experimental Investigation of Heat Transfer of Nanofluid in Elliptical and Circular Tubes”, Mathematical Modelling of Engineering Problems. (Scopus Q2).

Year 2021 (2 publications)

• Ali M. Mohsen, M.Z. Yusoff, Hakim S. Sultan Aljibori, A. Al-Falahi, Abdul Amir H. Kadhum, “Two-Dimensional Numerical Study of the Transient Flow Conditions in Complete Shock Tunnel”, Journal of Applied and Computational Mechanics (Scopus, Q1).
• Ali K. Jasim, Hasan Q. Hussein, Hakim S. Sultan, Ali M. Mohsen, “Numerical Study of Improved Heat Transfer with Phase Change Material Inside Rectangular Cells Using Copper Rods”, IOP Conf. Series: Materials Science and Engineering.

Years 2012 – 2019

• Ali M. Mohsen, M. Z. Yusoff, Hasril Hasini, A. Al-Falahi, “Two-dimensional computational modeling of high-speed transient flow in gun tunnel”, Shock Waves (Springer Nature) (Scopus Q2 and Clarivate SCIE Q3).
• Ali M. Mohsen, M. Z. Yusoff, A. Al-Falahi, N. H. Shuaib, “The Effects of Area Contraction on Shock Wave Strength and Peak Pressure in Shock Tube”, International Journal of Automotive and Mechanical Engineering (IJAME) (Scopus Q2).
• Dhuha Radhi, Ali M. Mohsen, Ammar Abdulkadhim, “Experimental Investigation of Two-Phase Fluid Flow Over a Rectangular Obstructions Located Inside Enlarged Rectangular Channel”, Mathematical Modelling of Engineering Problems (Scopus Q2).
• Ammar Abdulkadhim, Azher M. Abed, Ali M. Mohsen, K. Al-Farhany, “Effect of partially thermally active wall on natural convection in porous enclosure”, Mathematical Modelling of Engineering Problems. (Scopus Q2).
• Ali M. Mohsen, M. Z. Yusoff and A. Al-Falahi, “Area Contraction Effect on Shock Tube Performance, Numerical And Experimental Study”, Journal of Engineering and Applied Sciences (ARPN), Vol.10 (20), 2015, pp.9614-9620. (Scopus Q3).
• Ali M. Mohsen, M Z Yusoff, A Al-Falahi, “The Effects of Area Contraction on The Performance of UNITEN’s Shock Tube: Numerical Study”, 4th International Conference on Energy and Environment 2013 (ICEE2013), UNITEN. (Scopus Q3).

• Board of Engineers Malaysia (BEM) – Graduate Engineer – since 2018.
• Iraqi Engineers Union (IEU) – Practicing Engineer- since 2007.
• Iraqi Academics Syndicate – General Authority Member – since 2021.

• Differential Mathematics
• Automatic Control and Instrumentation
• Engineering Dynamics
• Heat Transfer
• Advanced Mathematics I
• Mechanics of Fluids I
• Engineering Graphics and CAE (PTC Creo + AutoCAD)

• Extensive Training course (9 - 14 December 2024) entitled “Simulation of two-phase flow using ANSYS Fluent” held in the College of Engineering, the University of Warith Al-Anbiyaa, Iraq.
• Training course (14 - 16 March 2022) entitled “Three-point flexural test using ANSYS software” held in the College of Engineering, the University of Warith Al-Anbiyaa, Iraq.
• Three-day seminar (4 - 6 October 2021) entitled “Instruction on the work principle of the examination committee in the college of engineering, while highlighting some common misinterpretations” held in the College of Engineering, the University of Warith Al-Anbiyaa, Iraq.
• Three-day seminar (5 - 7 May 2021) on “Using modern technological advancement and smart-boards to deliver and assess online teaching” held in the University of Warith Al-Anbiyaa, Iraq.
• Extensive course (March 2019) on “Recent Advancement in AutoCAD template preparation and implementation for multiple switch-board projects” held in Powerwell International Sdn. Bhd., Malaysia.